De gebruikte repeater van ICOM
Algemene repeater informatie:
- Frequency coverage :IC-FR6100 400-470MHz
- Number of channels : Max. 32 channels
- Channel spacing : 6.25*/12.5/20/25kHz
- PLL channel step : 2.5, 3.125kHz
- Antenna impedance : 50O (Type-N × 2)
- Power supply voltage : 13.2V DC
- Current drain (at 13.2V DC) :
TX 25W 8.0A/7.0A UHF, RX Max. audio 1.9A
Stand-by 500mA, 400mA (FAN, LCD backlight off)
- Operating Temp. range : -25°C to +55°C
- Dimensions (W×H×D) : 483×88×260 mm
- Weight : 5.6kg (approx.)
Transmitter:
- Output power : 25W (adjustable to 2.5W)100% duty cycle (PI2NWK set on 15W)
- Max. frequency deviation : ±5.0/4.0/2.5kHz (W/M/N)
- Frequency stability : ±0.2/±0.5kHz (VHF/UHF)
- Spurious emissions : 0.25µW (=1GHz), 1.0µW (>1GHz)
- Adjacent channel power : 73/73/65dB min. (W/M/N)
- Audio harmonic distortion : 1% typ. (40% deviation)
- Intermodulation : 40dB min.
- Microphone impedance : 600O (8-pin modular)
Receiver:
- Sensitivity FM (W/M/N) : -4dBµV typ. (emf, at 20dB SINAD)
Digital -6dBµV typ. (emf, at 5% BER)
- Squelch sensitivity : -4dBµV typ. (emf, threshold)
- Adjacent channel VHF : 86/83/77dB typ. (W/M/N)
selectivity UHF 80/78/70dB typ. (W/M/N)
- Spurious response : 70dB min. (W/M/N)
- Intermodulation rejection : 70dB min. (W/M/N)
- Audio output power : 3.5W min. at 5% distortion
with a 4O load
- Ext. speaker connector : 2-conductor 3.5 (d) mm
(1/8?)/4O
Ifo is een bewerkte copy van de website van PI2GOR
Met dank aan PI2GOR en PI1DFT voor de informatie
